Koch-Chemie One Cut & Finish P6.02 – High-Gloss Polish with Sealant
Cut, Polish and Protect in One Step
Koch-Chemie One Cut & Finish P6.02 is a machine polish that removes light to moderate paint defects while adding a high-gloss finish and a protective seal.
It helps remove scratches, swirl marks, polishing haze and holograms. In addition, it can remove sanding marks from P2000 grit.
The formula uses fine, even abrasives to deliver a smooth finish. It also contains carnauba wax and non-volatile silicones for added gloss and protection.
As a result, you can correct and protect paintwork in one polishing process, saving both time and effort.
Key Features & Benefits
- One-Step Polish & Seal: Corrects paint defects while leaving a protective finish.
- Effective Paint Correction: Helps remove scratches, haze, holograms and P2000 sanding marks.
- High-Gloss Finish: Leaves paintwork with a smooth, glossy look.
- Balanced Cutting Power: Cut level 6.0 and gloss level 8.0.
- Easy to Use: Spreads well and wipes off easily.
- Added Protection: Contains carnauba wax and non-volatile silicones.
Product Specifications
| Specification | Details |
|---|---|
| Brand | Koch-Chemie |
| Product | One Cut & Finish P6.02 |
| Size | 1 Litre |
| Product Type | Machine Polish with Sealant |
| Cut Level | 6.0 |
| Gloss Level | 8.0 |
| Formula | Contains carnauba wax and non-volatile silicones |
| Application | Machine Polishing |
| Recommended Pad | Koch-Chemie One Cut Pad |
Where Can You Use P6.02?
P6.02 is made for use on suitable automotive paintwork.
For example, it can be used on compatible painted surfaces found on cars, motorcycles and commercial vehicles.
It is a useful choice when the paint needs both correction and a glossy finish.
However, always test a small area first to check the result and make sure the product suits the surface.
How to Use Koch-Chemie P6.02
Step 1 – Prepare the Surface
First, wash and dry the vehicle. Make sure the paint is clean and free from loose dirt. Then, shake the bottle well before use.
Step 2 – Choose the Right Pad
For best results, use the Koch-Chemie One Cut Pad with a suitable machine polisher.
Step 3 – Apply the Polish
Next, add about five pea-sized drops of polish to the pad. Spread the product evenly over the work area at a low machine speed.
Step 4 – Polish the Paintwork
Then, polish in a crosshatch pattern with medium pressure. Work in small sections for better control.
Step 5 – Remove Residue
Finally, wipe away the remaining polish with a clean, soft polishing towel. Check the finish under good lighting.
Important Notes
- Shake well before use.
- Always test a small area first.
- Do not use on hot surfaces.
- Avoid contact with plastic and rubber trim.
- Protect the product from frost and excessive heat.
- Follow the product label and safety instructions.




















Reviews
There are no reviews yet.