Koch-Chemie Gelcoat Micro Cut Gm3.01 – Fine Polishing Compound 1L
Koch-Chemie Gelcoat Micro Cut Gm3.01 is a professional fine polishing compound designed for lightly weathered and dull gelcoat surfaces and boat paint. It removes fine scratches, polishing haze and holograms while restoring a smooth, high-gloss finish.
Thanks to its fine polishing action, Gm3.01 helps improve surface clarity and remove light defects. In addition, it works well as a finishing step after heavy paint correction, preparing the surface for protective sealing.
Fine Scratch Removal & High-Gloss Restoration
Gelcoat Micro Cut Gm3.01 offers:
- Removes fine scratches, polishing haze and holograms
- Restores gloss to dull and lightly weathered gelcoat
- Suitable for compatible boat paint and marine surfaces
- Easy to polish and wipe off
- Ideal for final polishing after heavy-cut correction
- Prepares the surface for a separate protective sealant or coating
As a result, Gm3.01 is ideal for professional boat and yacht detailing where a smooth, refined finish is required.
Professional Fine Polishing Application
For best results, follow these steps:
- Prepare: Clean and dry the surface thoroughly. Then, shake the bottle well before use.
- Choose a Pad: Use a Koch-Chemie Micro Cut Pad Hard with a suitable eccentric polishing machine.
- Apply: Add approximately five pea-sized drops of Gm3.01 evenly onto the polishing pad.
- Polish: Spread at a low speed, then polish in a crosshatch pattern at the machine’s highest speed setting, as directed by the manufacturer.
- Finish: Remove any remaining polish with a clean Koch-Chemie Polish & Sealing Towel.
- Protect: Finally, apply a suitable protective product such as Gelcoat Finish, Marine Protective Sealant or Ceramic Boat Hull.
Safe Application & Surface Protection
Always test material compatibility before polishing. Do not apply to hot surfaces or use on unpainted plastic and rubber. Also, protect the product from frost and excessive heat.
For safe handling, follow the manufacturer’s instructions and Safety Data Sheet. Since Gm3.01 is a fine polishing compound rather than a sealant, a separate protective coating is required after polishing.




















Reviews
There are no reviews yet.