Koch-Chemie 1K-Nano & Paintwork Sealant – 250ml

Nano paintwork sealant

Nano observe the recommended ambient temperature of 15-30°C. It is essential for

working and setting to take place inside and not in the open. 2. Shake the aluminium bottle

thoroughly shortly before use and fill the supplied plastic bottle (75ml). This amount is

usually sufficient for a medium-sized vehicle. If not enough 1K-Nano is applied the sealing

quality will suffer. Apply sealant only to fully set (see information below) painted surfaces. 3.

Apply 1K-Nano ideally mechanically (mechanical application is urgently recommended in

particular with single-layer and dark uni lacquers!) by means of an orbital sander without

forced orbit at low speed and with a black finishing pad (999292), alternatively manually

with a white pad (999038) without pressure in sections (max. 1 component: bonnet, door,

wing, etc.). Buff for approx. 2-3 minutes, always applying fresh sealant. In the polishing

process make several closely overlapping tracks in order to guarantee saturation

interlinking and to avoid clouding (uneven colour intensification). After these 2-3 minutes do

not apply any more fresh sealant and continue to polish until a continuous film without drop

formation (runs) is created. 3. Wait for a further 2-3 minutes and then polish the now

completely dry film by hand with a clean Profi microfibre cloth* to a high gloss. 4. After

approx. 1-2 hours reaction time the sealant has hardened, so that there is now a long-term

seal that is resistant to chemicals and wear. Any streaks that occur (excess product) are

caused through the reaction process and can be removed after the hardening period with a

Profi microfibre cloth* or are eliminated the first time the vehicle is washed (at the earliest

after 3 days). Information Attention: do not use on fresh repair paints! Repainted surfaces

require a hardening period of approx. 6-8 weeks before the sealant can be applied. OEM

paints with new vehicles can be sealed directly. During work, make sure there is sufficient

ventilation and fresh air! Because of the reactive components, 1K-Nano is kept in a tightly

sealed aluminium bottle. Pour any left over prduct back into the aluminium bottle after work,

recap the bottle immediately and store it upright at all times. After opening, the shelf life is

approx. 1 year. *When working with 1K-Nano use only the ultrasonically cut Profi microfibre

cloth (999241), because poorer quality cloths contain finishes such as fabric softeners,

silicone derivatives, etc., and thus prevent interlinking on the paint. Always use several

clean cloths to prevent residues being carried over and thus undesirable interlinking faults.