Fine Cut F6.01 Polish – Silicone-Free Fine Polishing Compound

Fine Cut F6.01 Polish is an advanced silicone-free polishing compound designed for the effective reconditioning of medium-weathered paintwork. With a cut level of 6.0 and gloss rating of 7.0, it balances strong defect removal with excellent finishing performance.

After heavy compounding, paint surfaces often require refinement to remove sanding traces and restore clarity. Therefore, Fine Cut F6.01 Polish serves as an ideal second step after Heavy Cut H9.02 or H7.01. It removes sanding marks up to P2500 grit quickly and efficiently.

Effective Correction with High Gloss Finish

Fine Cut F6.01 Polish eliminates:

Medium sanding marks
Wash-induced scratches
Moderate oxidation
Surface haze

Moreover, the intelligent aluminium oxide abrasives break down evenly during polishing. As a result, the compound delivers consistent correction while enhancing depth and gloss.

Unlike traditional products that rely on fillers, this polishing compound removes defects mechanically and leaves a durable, refined finish.

Ideal for Modern Paint Systems

Fine Cut F6.01 Polish works on:

Automotive paintwork
Commercial vehicle coatings
Motorcycle finishes

Because it is silicone-free, it is suitable for body shop environments and repainting processes.

Application Instructions

Apply the compound to a Fine Cut Pad or lambswool pad. Polish the pre-cleaned surface crosswise at up to 2,000 rpm.

Start with slightly higher pressure at lower speed to increase correction. Then gradually reduce pressure and increase speed to achieve maximum gloss.

Remove residues using a Profi ultrasonic-cut microfibre cloth. If required, refine further with Micro Cut M3.02.